Texas State Edition Lonestar When I Die Don't Let me Vote Democrat 4" Joe Bid

INSTRUCTIONS

Thank you very much for your business.  Here are a few instructions for you to have a successful decal install.  Installing decals is challenging so please take your time and let us know if you need help BEFORE install if you are unsure.

For decals, please be sure surface is 100% clean and non-porous.  Peel transfer tape very slowly.

Please prepare your decal for install after shipping.  During shipping your decal may be subjected to severe heat or cold and rough handling.   The longer the distance, the greater the chance for issues.   For large decals it can be very difficult to install them correctly.  There may be some wrinkles in the TRANSFER TAPE, but don’t worry the decal is still good.  This is very common from being rolled up and shipped.  Just follow the directions below to get rid of as many bubbles as possible.   We always recommend using a professional decal installer if you are not skilled in the art of decal installation. 

Pre install tip: Lay your decal on a flat surface in a warm environment.  Gently lift the transfer tape and with a squeegee or credit card gently press out the wrinkles from shipping.  There may some wrinkles in the transfer tape due to shipping but press them out gently the best you can and it will not affect the install.  Just be sure decal in laying flat on backing.

Step 1 – Clean the install area thoroughly with rubbing alcohol or soap and water.

Step 2 – Prepare the sticker for application by firmly/carefully rubbing a squeegee or credit card across the clear transfer tape.  Slowly lift the transfer tape to ensure the decal is attached.  If the decal is not attached, use a razor to gently lift the decal up along with the transfer tape.  Do this for all parts of the decal not attached to the transfer tape.

Step 3 – Carefully peel paper backing off the sticker.  If any part of the decal is not attached to the transfer tape, use a razor to help lift the decal onto the transfer tape. 

Step 4 – Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.  USE water/soap mist to assist in install.  *For larger decals please refer to attached

Step 5 – Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.

FOR CARBON FIBER

Please take extra care as carbon fiber does not stick well to the transfer tape.  Go slow and take your time to avoid mistakes with installation. Use heat and press firmly on WELL CLEANED surface after install.

GLOW IN THE DARK

Please make sure to follow the steps above as well as using heat after install to secure it to the surface. 

ALSO: Glow in the dark requires light source to glow.  Shine light on it, then it will glow for a short time.  It will not glow without light stimulation. 

https://www.youtube.com/watch?v=kDUraEETbn0

https://www.youtube.com/watch?v=07jjJC1NQO4

Non Porous Decal Install -- https://youtu.be/TgixZP65FXw

We do not type any personal addresses in our system when we ship, therefore it is super important that you use the correct shipping address when checking out. If you submit the incorrect shipping, please let us know ASAP, so we can cancel and refund the order so you can repurchase. If we are not notified, and the package is shipped to the address at checkout, the customer will need to repurchase stickers. — if the package comes back to us, we will reach out and you can pay to have the item reshipped. :)

We ship with USPS. Most orders are shipped with Priority shipping with tracking information. Actual delivery dates may vary due to holidays, or post office set backs. If you need quicker shipping, please message us BEFORE placing your order to see if we can accommodate. If you place your order before messaging us, standard processing and shipping times will apply.

Currently, ALL carriers are waiving delivery date guarantees. This means that even if you purchase expedited shipping, it is not guaranteed. Unfortunately, we will not be able to refund if we ship on time, and the product is delayed through the carrier. We understand this is wildly inconvenient, however please understand that we are not responsible as once the package is picked up, it is out of our hands. We will do our best to ship out as soon as we can, and you can always track your shipping under your orders here on Etsy to see where the package is currently. Delivery dates are estimates, but never guarantees. Please plan accordingly.

In addition, please note: USPS can fail to update their tracking system regularly. Please allow time for them to update. If the package is truly lost by the carrier, message us, and we will be happy to discuss options to help!

We offer the industry best return policy and customer service.  30 day money back or return NO HASSLE returns.  Super fast and efficient Customer Service. Reach out to us with any issues and we will work to fix it right away.  Thank you!!!